Panasonic SC-PT480 Operating Instructions Manual page 21

AUDIO menu
Select to suit the type of equipment you connected to the
HDMI AV OUT terminal.
Select "BITSTREAM" when the equipment can decode
the bitstream (digital form of 5.1-channel data).
Otherwise, select "PCM".
(If the bitstream is output to the equipment without a
decoder, high levels of noise can be output and may
damage your speakers and hearing.)
DOLBY DIGITAL
§
≥[BITSTREAM] ≥PCM
DTS
§
≥[BITSTREAM] ≥PCM
MPEG
§
≥BITSTREAM ≥[PCM]
§ When audio is output from HDMI AV OUT terminal,
and the connected equipment does not support the
item selected, the actual output will depend on the
performance of this connected equipment.
DYNAMIC RANGE
≥ON: Adjusts for clarity even when the volume is low.
Convenient for late night viewing. (Only works
with Dolby Digital)
≥[OFF]
SPEAKER SETTINGS
Select the delay time of the speakers.
(Center and surround speakers only)
For optimum listening with 5.1-channel sound, all the
speakers, except for the subwoofer, should be the same
distance from the seating position.
If you have to place the center or surround speakers
closer to the seating position, adjust the delay time to
make up for the difference.
C
:
L C R
:
SW
Approximate room
LS RS
dimensions
LS
RS
Circle of constant primary listening distance
If either distance a or b is less than c, find the difference
in the table and change to the recommended setting.
a Center speaker
Difference (Approx.) Setting Difference (Approx.) Setting
30 cm 1ms
60 cm 2ms
90 cm 3ms
120 cm 4ms
150 cm 5ms
≥SETTINGS:
≥C DELAY (Center Delay):
[0ms]
, 1ms, 2ms, 3ms, 4ms, 5ms
Select the delay time for your center speaker.
≥LS/RS DELAY (Left Surround/Right Surround Delay):
[0ms]
, 5ms, 10ms, 15ms
Select the delay time for your surround speakers.
≥TEST TONE: SETTING
This item is only displayed when "DVD/CD" is
selected.
Use the test tone for speaker level adjustments
( 11, Adjusting the speaker output level manually).
Actual speaker position
Ideal speaker position
Primary listening
:
distance
b Surround speaker
150 cm
300 cm
450 cm
DISPLAY menu
LANGUAGE
Choose the language for the on-screen messages.
≥[ENGLISH] ≥FRANÇAIS ≥ESPAÑOL
≥ITALIANO ≥SVENSKA ≥NEDERLANDS≥POLSKI
HDMI menu
VIDEO PRIORITY
≥[ON]: When using the HDMI AV OUT terminal for video
output. The resolution of the video output from
the HDMI AV OUT terminal is optimised
according to the capability of the connected
equipment (e.g. TV).
≥OFF: When not using the HDMI AV OUT terminal for
video output.
AUDIO OUT
≥ON: When audio output is from the HDMI AV OUT
terminal. (Depending on the capabilities of the
connected equipment, audio output may differ
from the audio settings of this unit.)
≥[OFF]: When audio output is not from the HDMI AV OUT
terminal. (The audio is output using the settings
of this unit.)
RGB RANGE
This works only when "COLOUR SPACE" in Menu 4
(HDMI) is set to RGB (
≥[STANDARD]
≥ENHANCED: When the black and white images are not
VIERA Link
≥[ON]: The VIERA Link "HDAVI Control" function is
available (
≥OFF
POWER OFF LINK
Select the desired power off link setting of this unit for
VIERA Link operation (
the settings of the connected VIERA Link "HDAVI
Control" compatible equipment.)
≥[VIDEO/AUDIO]: When the TV is turned off, this unit will
≥VIDEO: When the TV is turned off, this unit will turn off
except during the following conditions:
–audio playback ([CD] [MP3] [WMA])
5ms
–iPod/iPhone mode
10ms
–radio mode
15ms
–"AV", "AUX", "ARC" or "D-IN" mode
(non-selected TV audio setting for VIERA
Link)
TV AUDIO
Select the TV audio input to work with the VIERA Link
operations (
≥[AUX]
≥ARC
≥DIGITAL IN
≥AV
16).
distinct.
16).
17). (This works depending on
turn off automatically.
16).
≥DEUTSCH
21