Easy Control Only With Viera Remote Control (For "Hdavi Control 2 Or Later") - Panasonic SC-PT480 Operating Instructions Manual

Auto input switching
(Power on link)
When the following operations are performed, the TV will
automatically switch the input channel and display the
corresponding action. Additionally when the TV is off, the
TV will automatically turn on.
–When play starts on the unit
–When an action that uses the display screen is
performed (e.g., START menu)
≥When you switch the TV input to TV tuner mode or the
STB input channel, this unit will automatically switch to
"AV" , "AUX" , "ARC"
§1 §1 §1
(For "IPOD" mode, this works only in iPod/iPhone
music mode, or when iPod/iPhone is not connected.)
≥When this unit is in "DVD/CD" mode, the TV will
automatically switch its input mode for this unit.
≥The TV will automatically switch to TV tuner mode
when:
–you press [EXIT].
§3, 4
–you press [RETURN] to exit the START menu.
–you select "AV" , "AUX"
§1
from the START menu.
–playback stops ([DVD-V] [VCD]) or when this unit turns
off.
§4
§3 This does not work during playback or resume mode
when "DVD/CD" or "USB" is selected as the source.
(For "IPOD" mode, this works only in iPod/iPhone
music mode, or when iPod/iPhone is not connected.)
§4 Only after the TV automatically switched to the HDMI
input mode for this unit.
Power off link
All connected equipment compatible with "HDAVI Control",
including this unit, automatically turn off when you switch
the TV off.
To continue audio playback even when the TV is turned
off, select "VIDEO" ( 21, "POWER OFF LINK" in HDMI
menu).
[Note]
When you press [Í]1, only this unit turns off. Other
connected equipment compatible with VIERA Link
"HDAVI Control" stays on.
For details, refer also to the operating instructions for
your TV.
Speaker Selection
You can select whether audio is output from this unit's
speakers or the TV speakers by using the TV menu
settings. For details, refer to the operating instructions for
your TV.
Home Cinema
This unit's speakers are active.
≥When you turn on this unit, this unit's speakers will be
automatically activated.
≥When this unit is in standby mode, changing the TV
speakers to this unit's speakers in the TV menu will
automatically turn this unit on and select "AV"
"AUX" , "ARC" or "D-IN"
§1 §1
≥The TV speakers are automatically muted.
≥You can control the volume setting using the volume or
mute button on the TV's remote control. (The volume
level is displayed on this unit's display.)
≥To cancel muting, you can also use this unit's remote
control ( 4).
≥If you turn off this unit, TV speakers will be
automatically activated.
or "D-IN" .
§1, 2
§3, 4
, "ARC" or "DIGITAL IN"
§1 §1
,
§1
as the source.
§1, 2
TV
TV speakers are active.
≥The volume of this unit is set to "0".
–This function works only when "DVD/CD", "USB",
"AV" , "AUX" , "ARC"
§1 §1
the source on this unit.
≥Audio output is 2-channel audio.
When switching between this unit speakers and TV
speakers, the TV screen may be blank for several seconds.
Easy control only with VIERA remote control (for
"HDAVI Control 2 or later")
You can control the playback menus of this unit with the
TV's remote control.
1 Select this unit's operation menu by using the TV menu
settings. (For details, refer to the operating instructions
for your TV.)
The START menu will be shown.
e.g. [DVD-V]
§1
DVD/CD
P lay ba ck Dis c
TOP MENU (DVD)
MENU (DVD)
Input Selection
Setup
≥The START menu can also be shown by using a
button on the TV's remote control (e.g. [OPTION]).
–When "DVD/CD" or "USB" is selected as the source,
the TV's remote control works only during stop
mode.
–This does not work while iPod music playback
screen is displayed on the TV.
2 Select the desired item on the START menu (
When the on-screen control panel appears
e.g. [DVD-V] (when "Playback Disc" is selected from the
START menu.)
You can operate the playback with the indicated controls.
≥The on-screen control panel can also be shown by
using a button on the TV's remote control (e.g.
[OPTION]).
–This works only during "DVD/CD" or "USB" playback
and resume modes or, while iPod music playback
screen is displayed on the TV.
[Note]
≥Depending on the menu, some button operations
cannot be performed from the TV's remote control.
≥You cannot input numbers with the numbered buttons
on the TV's remote control ([0] to [9]). Use this unit's
remote control to select the play list etc.
or "D-IN" is selected as
§1, 2
§1
Home Cinema
Playback/menu
access
10).
17