Panasonic SC-PT480 Operating Instructions Manual page 15

SUBTITLE
[DVD-V] [DivX] (with multiple subtitles) [VCD] (SVCD only)
To select subtitle language
≥On iR/iRW, a subtitle number may be shown for
subtitles that are not displayed.
[DVD-VR] (with subtitle on/off information)
To select "ON" or "OFF"
≥This may not work depending on the disc.
[DivX] ( 22, Displaying DivX subtitles text)
ANGLE
[DVD-V] (with multiple angles)
To select a video angle
DATE DISPLAY
JP G
DATE
[JPEG] To select "ON" or "OFF" for picture's date
display
ROTATION
[JPEG] To rotate a picture (during pause)
0,------. 90,------.180,------.270
^--------------------------------------------J
Menu 2 (Video)
PICTURE MODE
NORMAL
CINEMA1: Mellows images and enhances detail in
dark scenes.
CINEMA2: Sharpens images and enhances detail in
dark scenes.
DYNAMIC: Enhances the contrast for powerful images.
ANIMATION: Suitable for animation.
ZOOM
To select zoom sizes
NORMAL, AUTO ([DVD-VR] [DVD-V] [VCD] [MPEG4] [DivX]),
k2, k4
≥[JPEG]: during pause
TRANSFER MODE
If you have chosen "480p"/"576p"/"720p"/"1080p" or
"1080i" ("VIDEO FORMAT" in Menu 4 (HDMI)), select
the method of conversion for progressive output to suit
the type of material.
≥The setting will return to "AUTO" or "AUTO1" when the
disc tray is opened, the unit is turned off or another
source is selected.
When playing PAL discs
AUTO: Automatically detects the film and video
content, and appropriately converts it.
VIDEO: Select when using "AUTO", and the content
is distorted.
FILM: Select this if the edges of the
film content appear jagged or
rough when "AUTO" is
selected. However, if the
video content is distorted as
shown in the illustration to the
right, then select "AUTO".
When playing NTSC discs
AUTO1: Automatically detects the film and video
content, and appropriately converts it.
AUTO2: In addition to "AUTO1", automatically
detects film contents with different frame
rates and appropriately converts it.
VIDEO: Select if the video content is distorted when
using "AUTO1" or "AUTO2".
SOURCE SELECT [DivX]
When you select "AUTO" the constructing method of the
DivX contents is automatically distinguished and output.
If the picture is distorted, select "INTERLACE" or
"PROGRESSIVE" depending on which constructing
method was used when the contents were recorded to
disc.
AUTO, INTERLACE, PROGRESSIVE
Menu 3 (Audio)
DIALOGUE ENHANCER
To make the dialogue in movies easier to hear
[DVD-V] (Dolby Digital, DTS, 3-channel or higher, with the
dialogue recorded in the center channel)
[DivX] (Dolby Digital, 3-channel or higher, with the
dialogue recorded in the center channel)
OFF, ON
Menu 4 (HDMI)
HDMI STATUS
HDMI
To show HDMI information
e.g.
HDMI --- INFORMATION
CONNECTED STATE
AUDIO STREAM
MAX CHANNEL
VIDEO FORMAT
COLOUR SPACE
1 Connection status
2 Shows the output signal type.
(When "OFF" is selected in "AUDIO OUT"
( 21, HDMI menu), "– – –" will be displayed.)
3 Shows the number of audio channels.
4 ( 16, VIDEO FORMAT)
5 ( 16, COLOUR SPACE)
HD ENHANCER
This works when the HDMI connection is being used
with "VIDEO PRIORITY" (
"ON".
To sharpen the "720p", "1080i" and "1080p" picture
quality
OFF, 1 (weakest) to 3 (strongest)
CONNECTED
PCM
2ch
720p
YCbCr 4:4:4
21, HDMI menu) set to
15