Speaker Installation Options - Panasonic SC-PT160 Operating Instructions Manual

Speaker installation options

7 Attaching to a wall
You can attach all of the speakers (except subwoofer) to
a wall.
• The wall or pillar on which the speakers are to be
attached should be capable of supporting 10 k per
screw. Consult a qualifi ed building contractor when
attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers.
1
Drive a screw (not included) into the wall.
Ø4.0 mm
Wall or pillar
2
Fit the speaker securely onto the screw(s) with the hole(s).
Center speaker
7 Reattaching the speaker cable to the stand
1
Remove the eight screws from the stand,
and remove the speaker net.
Screw
At least 30 mm
Ø7.0 to 9.4 mm
4 to 6 mm
Front and surround
speakers
Surround speaker
Preparation for front speakers
W
Tighten securely.
Cover plate
Q
E
*
Use the cable from the stand by releasing it from the
grooves at both ends.
Front speaker
Attach to a wall without the
base and the stand
106 mm
Example:
In this position, the
speaker will likely
fall if moved to the
left or right.
2
Position the cable.
Press the cable into
the groove.
Approx.
15 cm
3
Attach the speaker net with the screws.
\
*
Connect the cable ( page 8).
340 mm
Move the speaker
so that the screw is
in this position.
Cable
9
RQT8043