Panasonic CS-A182KR Operating Instructions Manual page 11

MODE
1
OFF/ON I
2
FAN SPEED
3
TEMP.
4
i
5
MANUAL
SWING
HEAT – Heating Operation
Defrosting Operation
Depend on the outdoor temperature, the operation
occasionally stops to melt the frost on the outdoor
unit.
Heat is obtained from outdoor air to warm up the
room. When the outdoor ambient air temperature
falls, the heating capacity of the unit might be
reduced.
Press to select operation mode.
The display changes in the order
each time the button is pressed.
Press to start the operation.
Operation indication lamp (RED) will light up.
Press once more, to stop the operation.
Press to select airflow volume.
The display changes in the order.
Automatic Low
Press to select room temperature.
Heating, Cooling, Soft Dry – Select temperature as desired.
(16°C ~ 30°C)
Automatic. (See <Operation Details>)
m n
2°C lower than
standard
MANUAL
Press continuously.
The vertical airflow direction louver will move up and down. Release the
button when the louver is at the desired position.
SWING
Press .
Cooling & Soft Dry – The vertical airflow direction louver will swing up and down
automatically.
Heating – When the discharge air temperature is low such as at the start of
heating operation, the air blows at horizontal level. As the
temperature rises, the hot air blows in a downwards direction.
To stop the automatic airflow direction operation, press
Automatic Airflow Volume
Range of louver adjustment
Medium
n
n o
standard
2°C higher than
standard
The speed of the indoor fan is adjusted automati-
cally according to the operation. The indoor fan
stops occasionally during cooling operation.
High
MANUAL
button.
34°
46°
57°
10