Care And Cleaning; Condenser Cleaning; Internal Cleaning - AGA P R E M I U M S E R I E S User Manual

Hide thumbs

Table Of Contents

Table of Contents

Carefully follow the detailed directions that can

be found in the provided kit and never use

abrasive or metallic products which could scratch

and permanently damage the painted parts.

Prior to carry out any cleaning operation turn

off the unit.

The condenser ﬁns are sharp, therefore use ad-

equate protection for the hands and arms when

cleaning the condenser.

Do not use water on the electrical parts, lights

and control panel.

Do not bring cold glass parts into contact with

boiling water.

Do not wash any parts of the refrigerator in a

dishwashing machine since this could damage

or irreparably deform the parts.

To clean the stainless steel parts use e-cloth and the sponge provided in

the kit with this appliance.

Do not use the sponges on aluminium parts, for example, the door

handles and the glass shelves trims.

Cleaning the condenser is not normally necessary in a home

environment. If it should become necessary, switch off the appliance

by pressing the Unit button

approximately 3 seconds.

In models with ventilation at the base, remove the protection grille on the base

of the appliance after having unscrewed the mounting screws.

In models with ventilation in the upper part of the appliance, remove

the protection grille mounted with pressure hooks by pulling it outward.

In some cases you may need to free the grille from the hooks by prising

it off from the top as illustrated. Use a ﬂat blade screwdriver, and to

avoid damages or scratches to the grille, wrap some protective tape

around the tool's end.

Wait approximately 30 minutes until the condenser has reached

room temperature. Remove the upper or lower front ventilation grill

(depending on the model) and use a soft brush or vacuum cleaner

to remove any dust deposits as illustrated, being careful not to cause

damage.

Take care to also clean the ﬁlter which is located behind the front

ventilation grille.

Clean the internal and removable parts by washing them with a solution

of tepid water, a small amount of dishwashing detergent and a pinch

of baking soda.

Rinse and dry right away.

It is highly recommended not to use mechanical devices ot other

means to speed up the defrosting process.