Fujitsu D3031 Technical Manual page 18

Overview
Chips on the system board
®
– Intel Tylersburg 24D chipset
®
– Intel IOH (north bridge)
®
– Intel ICH10R (south bridge)
®
– Intel dual-port Gigabit Ethernet controller 82575EB
– onboard iRMC S2 Server Management Controller with integrated graphics
controller and associated management LAN connector
– Flash EPROM for:
– BIOS
– LAN
– Server Management (SM)
Internal connectors
– 1x front panel connector
– 1x video connector (VGA) at the front side
– 1x SATA connector with 4 ports (hard disk drives)
– 1x SATA connector (optical disk drive)
– 1x main power connector
– 1x power supply monitoring and controlling connector
– 6x system fan monitoring and controlling connectors
– 1x connector for USB Flash Module (optional)
– 1x connector for Trusted Platform Module (optional)
– 1x connector (2 pin) for external generation of a system reset
External connectors
– Rear side
– 1x serial connector (COM)
– 3x USB connectors
– 1x video connector (VGA)
– 2x RJ45 LAN connectors
– 1x RJ45 management LAN connector
– Front side
– 3x USB connectors
– 1x video connector (VGA)
PCI slots
– 2x PCI Express x8 expansion slots
– 1x PCI Express x4 expansion slot (mechanical x8)
18 Technical Manual
D3031
Features
(RX200 S6)