FujiFilm FN-PS551 User Manual page 7

6 Print Queue Management
SOP Class
7 Basic Annotation Box
SOP Class
The 3rd and 4th SOP Classes that have been negotiated so far only by combined with the 2nd SOP
Class are now permitted to be negotiated with no combination. The 3rd and 4th SOP Classes may
inhibit SCP's resource consumption rather than when negotiated being combined with the 2nd SOP
Class, resulting in improving SCP's processing speed (CP-81). The 6th SOP Class can be negotiated
solely with no combination or being combined with any other.
♦ SOP Specific Conformance
• The FN-PS551 may return the following error codes in response to any message received.
Code
0122H
0211H
• For 0107H, 0116H and B604H Warning Status, it is possible to disregard them and individually
specify so that they are processed same as the "Success: (0000H)."
• It is possible to specify so that the N-EVENT-REPORT message is not issued.
• The maximum number of Print Job is 64.
• When the same Image Position (2020,0010) has been specified one or more times by N-SET in Basic
Grayscale Image BOX, the Image Position specified the last will be effective. N-ACTION for Basic
Film Session or Basic Film Box will quit normally, not resulting in C604H error (CP-80).
• In Failure status, no message will be returned by "Attribute List."
• In Success/Warning status when in N-CREATE, all supported attributes included in the instance that
has been created as the "Attribute List" will be returned.
• In Success/Warning when in N-SET, items that have been properly updated in the items specified by
the SCU will be returned as the "Attribute List." However, Preformatted grayscale image sequence in
the Basic Grayscale Image Box will not be returned.
• When Status (0000,0900) = 0107H (Attribute list error), the Attribute Identifier List (0000,1005) will
not be returned.
• In certain Failure/Warning status, the Error Comment (0000,0902) will be returned.
See Appendix D.
006-203-30 2001.05
Status
Failure SOP class not supported
Failure Unrecognized operation : the command is not supported for the SOP
class (e.g. N_CREATE for Image Box SOP class)
1.2.840.10008.5.1.1.26
1.2.840.10008.5.1.1.15
Meaning
4
FUJI NETWORK PRINT SERVER FN-PS551
Table-1 SCP
Table-1 SCP
None
None