Table of Contents
Advertisement
Requested Image Size (2020,0030)
The tables below show the maximum number of pixels that can be recorded without reducing the image size.
Calculate the maximum value of the requested image size
tables.
FM-IM (1)......A value divided by 10 (the printer's image recording density is 10lines/mm)
*Printer series names: FM-DP L, CR-DP L, FL-IM D, FL-IM II, CR-LP414N, FL-IM2636N,
FL-IM (2).......A value divided by 20 (the printer's image recording density is 20lines/mm)
*Printer series names: FM-DP L or CR-DP L
CR-DP............A value divided by 12 (the printer's recording density is 300DPI)
*Printer series names: FM-DP3543, FM-DP2636, DRYPIX1000 or DRYPIX3000
The above values are given on the assumption that the frame width to be 0 and interval between each image
data to be 20 for the configuration settings with the FN-PS551. Increasing the frame width by 1 will reduce
the size by 2. If interval between each image data is changed, such a change will be reflected or assigned
equally to each image data.
Allowable values differ depending on the image data recording pitch of the printer connected to the
FN-PS551.
Note that values shown in "Column" are applicable to the X (horizontal) dimension and "Row," the Y
(vertical) dimension.
1
It used to be specified "Length in mm that Image rows of the Image are to be printed." But, it has been changed to "Width
(X-dimension) in mm of the image to be printed" according to CP108. Thus, calculate it based on the values shown in Column.
006-203-30 2001.05
1
based on values shown in the Column of those
FL-IM3543N, FL-IM3543MN or FL-IM3535M
42
FUJI NETWORK PRINT SERVER FN-PS551
Advertisement
Table of Contents
