Bar Controls; Back Panel; Source Led - Polk Audio Surroundbar 9500BT User Manual

SOURCE LED GUIDE
SOURCE 1
SOURCE 2
SOURCE 3
SOURCE 4
Bluetooth

BAR CoNTRolS

FRoNT PANEl:
1. learn—Puts the bar into "learning mode" so
you can program it to respond to commands
from your existing remote control.
2. Source—Changes which input source
you are listening to.
Source 1: digital/optical
Source 2: digital/optical
Source 3: analog
Source 4: analog
Source 5 Bluetooth (
technology (See "PAIR AND CONNECT YOUR
BLUETOOTH DEVICE WITH THE SURROUNDBAR"
on page 8.)
lED—Blue light indicates which Source has
been selected (see Source LED Guide above).
Source 1 or 2 LEDs will light green if Dolby
Digital signal is being decoded or orange
if DTS is being decoded.
3. Power ( )—Turns on the bar or puts
it in standby mode.
lED—A light that shines green, orange
or red to indicate operating status.
4. Mute—Mutes and unmutes the sound
coming from the SurroundBar 9500
indicated by green slow flash.
5. volume up and Down (
the volume of the SurroundBar 9500

BACk PANEl:

6. Power Switch—Turns the bar on or off,
but you can leave it on all the time.
7. Power Connection—The bar power supply connects here.
8. Audio Inputs (Source 1, 2, 3 or 4)—Where you connect
your TV (or other sources) to the SurroundBar 9500
Use the 6' optical cable provided (Source 1 or 2 are digital)
or 1/8" analog cable provided (Source 3 or 4 are analog).
9. SyNC—The SYNC button ensures the subwoofer
and bar are communicating. (See "SYNCING THE
BAR AND WIRELESS SUBWOOFER" on page 7.)
1
): Bluetooth wireless
®
,
BT
/ )—Adjusts
.
BT
BT
Customer Service Hours of Operation: Monday-Friday, 9
2 3 4
FRONT
BACK
5.0A
120W
6 7
BAR PowER (
NoRMAl oPERATINg MoDE:
green Steady—Power is on; all is well.
Red Steady—The bar is in standby mode.
green Two Blinks—A remote control or keypad
operation signal is received successfully.
green Slow Blinking—System is muted.
green Fast Blinking (After pressing volume up
button)—You have reached the maximum volume.
green Fast Blinking (At power up)—The bar and
subwoofer have established a wireless connection.
BAR PowER (
lEARNINg MoDE: (See page 9 for instructions.)
orange Blinking—The bar is in learning mode.
orange Steady—The bar is in learning mode
and a function has been selected.
green Blinking—The bar has successfully
learned a remote control command.
Red Blinking—The bar has failed to learn
a remote control command.
Red and orange Blinking—Learned IR codes
have been successfully erased.

SouRCE lED

green Blinking—Dolby Digital source
recognized (Source 1 and 2 only).
green Steady—Dolby Digital source received
and is being decoded (Source 1 and 2 only).
Blue Steady—PCM or analog source received.
.
orange Blinking—DTS source received
and is recognized (Source 1 and 2 only).
orange Steady—DTS source received
and is being decoded (Source 1 and 2 only).
5
8 9
) lED
) lED
-5:30 polkcs@polkaudio.com
am pm est
3