Installation
Door removal
1) Removing the hinge cover by loosening
the screws. Separate all connection wires
except for the earth line after.
2) Remove the keeper by rotating it counter
clockwise ( ) and then lifting the upper
hinge up ( ).
•
When removing the upper hinge, be careful that the door does not fall forwards .
3) Remove the freezer compartment door by
lifting it upward.
•
Move the refrigerator compartment door passing through the access door and lay
it down.
1) Loosen the hinge cover screws and
remove the cover. Remove connection
wire, if any, except for the earth line.
2) Remove keeper by rotating it clockwise
( ) and then remove the upper hinge
by lifting it up (
3) Remove the refrigerator compartment
door by lifting it up.
Upper hinge
).
Hinge
cover
Keeper
Lower hinge
Connection
wires
Upper hinge
Keeper
Lower hinge
Connection
wires
Ground Line
Upper hinge