Using The Cd Player - JVC CA-MD9R Instructions Manual

The Player built in the CA-MD9R has 3 CD trays. You can use Continuous, Random, Program or
Repeat Play for the CDs on CD1, CD2 and CD3 trays. Repeat Play can repeat all the tracks on all
the CDs, the tracks on one of the CDs or one track on one CD. There is also the Disc Lock function,
prohibiting CD ejection (see page 66.)
The Quickest Way to Start a CD Is with the One Touch Operation ——————
The power comes on, and operations are done automatically.

Using the CD Player

Loading CDs ———————————————————————————
1.
3
CD
2
CD
2.
1
CD
3
CD
2
CD
1
CD
3.
4.
EN.01-24.CA-MD9R[E]/F
Press the ‹/8 button (or the £ button on the Remote Control).
• If there is a CD on the currently selected tray, playback begins from the first track of this
CD.
• If there is no CD on the currently selected tray, playback begins from the first track of the
following CD.
• If there is no CD on any of the CD trays, "CD NO DISC" appears on the display for a few
seconds. Put a CD on one of the trays and press the ‹/8 button (or the £ button on the
Remote Control)
Press one of the CD buttons (1 to 3) (or one of the DISC buttons (1 to 3) on the Remote
Control).
• If there is a CD on the CD tray for the CD number you have selected, playback begins from
the first track of that CD. If there is no CD on the CD tray, "CD NO DISC" appears on the
display for a few seconds. Put a CD on that tray, then press the CD button (1 to 3) for that
tray (or the corresponding DISC button (1 to 3) on the Remote Control).
Press the 0 button.
• The power comes on, and the corresponding tray comes out automatically.
Press the 0 button on the CD Player you want to load the CD onto.
The CD tray comes out automatically.
Place a CD, with its label side up, onto the tray.
CD
Tray
CORRECT
To put an 8 cm CD on a tray, insert it so that it is aligned with the groove in the tray's center.
Note: To avoid malfunctions when you play a CD, place the CD in the right place at the center of
the tray.
Press the 0 button to close the tray.
Repeat steps 1 to 3 to load other CDs on the other trays.
To continue putting CDs on the other trays, even if a tray is open, by pressing the 0 button
of another CD tray, the open tray will close automatically, and the new CD tray will slide
out.
19
INCORRECT
6/16/98, 1:49 PM
19