JVC CA-MD9R Instructions Manual page 62

Compact component md system
Hide thumbs Also See for CA-MD9R:
Table of Contents

Advertisement

2.
3.
MULTI JOG
SET
4.
MULTI JOG
5.
SET
Note:
If you press any other button than the specified ones while setting the clock, the procedure will be
canceled and you will have to restart from the beginning.
CAUTION: If there is a power failure, the clock loses its setting. The clock becomes "0:00", and the
clock must be reset.
58
EN.51-72.CA-MD9R[E]/F
Each time you press the button, the Clock/Timer setting mode changes as follows:
DAILY on/off
Turn on/off the Daily Timer
DAILY Timer On Time
Set the Daily Timer
REC1 on/off
Turn on/off the Recording 1 Timer
REC1 Timer On Time
Set the Recording 1 Timer
REC2 on/off
Turn on/off the Recording 2 Timer
REC2 Timer On Time
Set the Recording 2 Timer
Turn on/off the Recording 3 Timer
REC3 on/off
Set the Recording 3 Timer
REC3 Timer On Time
Set the clock
Clock Setting
Display before you press the button
Normal Display (current source)
Rotate the MULTI JOG dial clockwise or counterclockwise to adjust the hour.
Rotate the MULTI JOG dial clockwise to advance the hour setting, rotate it counterclockwise to
decrease the setting.
Press the SET button.
The minute digits starts flashing on the display.
Rotate the MULTI JOG dial clockwise or counterclockwise to adjust the minute.
Rotate the MULTI JOG dial clockwise to advance the minute setting, rotate it counterclockwise
to decrease the setting.
Press the SET button.
The clock starts at zero seconds from the set time.
58
These will not
appear when you set
the clock for the first
time.
6/16/98, 1:52 PM

Advertisement

Table of Contents
loading

Table of Contents