Playing Cds - JVC CA-MD9R Instructions Manual

Playing CDs ———————————————————————————
You can play the CDs continuously. (Continuous Play)
1.
2.
3
CD
2
CD
1
CD
1 2 3
DISC DISC DISC
To use Continuous Play from the first track of the currently selected CD, just press the ‹/8 button
(or the £ button on the Remote Control).
Playing order of CDs
To stop play, press the 7 button.
To remove the CD, press the 0 button for the CD tray you want to open.
To pause, press the ‹/8 button on the unit. The indicator above the tray starts flashing.
To cancel pause, press the ‹/8 button again (or press the £ button on the Remote Control).
Changing CDs while Playing ————————————————————
You can replace a CD not playing, while another CD is playing.
1.
2.
3.
20
EN.01-24.CA-MD9R[E]/F
Prepare the CDs.
Press the CD button (1 to 3) (or the DISC button (1 to 3) on the Remote Control) for the CD you
want to play.
The first track of the selected CD will begin playing.
When the selected CD finishes playing, the next CD begins playing automatically.
When the last CD has finished playing, the unit stops playing the CDs.
When you press the CD button (1 to 3) (or DISC button (1 to 3) on the Remote Control) while a
tray is open, the open tray will close automatically and Continuous Play playback begins from
the first track of the CD.
When playback starts from CD1, the playing order is CD1 = CD2 = CD3. When CD3 has
finished, the CD Player selects CD1 and stops.
When playback starts from CD2, the playing order is CD2 = CD3 = CD1. When CD1 has
finished, the CD Player selects CD2 and stops.
When playback starts from CD3, the playing order is CD3 = CD1 = CD2. When CD2 has
finished, the CD Player selects CD3 and stops.
• If no CD is on a tray, the CD Player skips that tray.
Press the 0 button for the CD not playing.
The tray comes out.
Replace the CD on the tray.
Press the 0 button to close the tray.
20 6/16/98, 1:49 PM