LG LAC-M8600R Owner's Manual page 12

Car cd/mp3/wma receiver
Table of Contents

Advertisement

Basic operation
Changing the monitor angle
Press and hold the
TILT to adjust the front panel to an easily viewable angle.
Z/
• The angle of front panel can be adjusted up to 3 steps.
• The adjusted the LCD panel angle will be memorized and the monitor panel will
automatically return to this angle the next time the monitor panel is opened.
Setting the menu
1 Press and hold the VOL./MULTI (MENU/SEL on remote control) for about 1 second.
The menu screen appears.
Beep y EON TA y DPI y TA y ECM y SRS focus
2 Push the VOL./MULTI toward up or down to scroll between menus.
(Press the U U u u on the remote control.)
3 Push the VOL./MULTI toward left or right to select the settings of your choose.
(Press the
?m m/M M?
4 Press the VOL./MULTI shortly to exit main screen.
SRS focus
Beep
EON TA
DPI
TA
ECM
(Echo Cancellation
Mode)
on the remote control.)
Set the SRS focus quality.
( HIGH / LOW )
Set the beep sound every time a button is pressed.
• 2ND mode : The beep is only generated when a key is
long pressed (1 sec)
• ALL mode : The beep is generated when any key is pressed.
• DISTANCE : EON TA switching is try to implemented by the
information of current station.
• LOCAL
: When the filed strength level of EON linked is less
than threshold level, the radio does not switch that
station, and customer can hardly listen to any
disturbances.
• SOUND : If the sound of a station with different PI is heard
intermittently, the receiver mutes the sound after
1 second.
• MUTE : If the situation described above is repeated, the receiver
instantly mutes the sound.
• ALARM : When a newly tuned station has no TP information for 5
seconds, a double beep sound is output.
• SEEK : When the newly tuned station does not receive TP
information for 5 seconds, the receiver retunes to the
next station which has the same PI as the last
station, but has the TP information.
It is to decrease any echo phenomenon of voice coming from the
Bluetooth phone of the other party when working Bluetooth.
Control the mode(1-3) to the appropriate condition when talking over
the phone.
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents