Table of Contents
Advertisement
When you use the wine cabinet for the first time or restart the wine cabinet after it has been switched
off for a long time, there could be a few degrees variance between the temperature you select and the
one indicated on the LED readout. This is normal and it is due to the length of the activation time. Once
the wine cabinet has been running for a few hours, the temperature display will re-gain accuracy.
Locking the door
The door lock keys are located inside the plastic bag that contains the User Guide. Insert the key into
the lock and turn it anticlockwise to unlock the door. To lock the door do the reverse operation making
sure metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping.
Using the shelves
•
To prevent damaging the door gasket, make sure the door is fully open when pulling shelves out of
the rail compartment.
•
For easy access to the storage content, you must pull the shelves approximately 1/3 out of the rail
compartment; however this unit was designed with a notch on each side of the shelf tracks to
prevent bottles from falling.
•
Put the shelf gap (left and right) under the square plastic block, lift the shelf, then pull the shelf
from the Wine Cabinet.
6
Advertisement
Table of Contents
