Table of Contents
Advertisement
Operating your wine cabinet and setting the temperature
The wine cabinet should be placed where the ambient temperature is between 5-32 deg
centigrade. If the ambient temperature is above or below this range, the performance of the unit may
be affected. For example, placing your unit in extreme cold or hot conditions may cause interior
temperatures to fluctuate and prevent it reaching the set temperature.
Control panel
•
RUN
Indicator light illuminates to signify the cooling mode is currently in operation.
•
LIGHT
To control the inner light, turn on/off.
•
POWER
To switch the appliance on/off.
•
"UP" Button
Used to raise (warm) the temperature in 1˚C.
•
"DOWN" Button
Used to lower (cool) the temperature in 1˚C.
•
"DISPLAY"
Shows the temperature of the internal cabinet.
•
"TEMP.SET"
Displays the setting temperature.
Setting the Temperature Control
•
To set the temperature:
Connect the power cord to a properly grounded outlet. In the event of a power interruption, all
previous temperature settings are automatically erased and it will default to a preset temperature
setting of: 12˚C.
•
Set the desired cooling temperature by pressing the buttons adjacent to the "UP/DOWN"
program. Each depression of the buttons will scroll through the available temperature settings in
increments of 1 degree. The temperature selected will flash in the LED display for approximately 5
seconds, then revert back to display the set temperature of the cabinet.
•
The temperature setting can be adjusted from 5˚C to 18˚C.
NOTE:
If the unit is unplugged, if power is lost, or turned-off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the wine cabinet will not start.
5
Advertisement
Table of Contents
