How To Change The Door Opening - Caple WF1544 Instruction Manual

Freestanding wine cabinet

Hide thumbs Also See for WF1544:

Table of Contents

How to change the door opening

This appliance has reversible doors but is delivered with a right hinged door. The left hand hinge

kit comes with the unit (in the box), should you wish to reverse the hinge on your unit.

Fig.A

Fig.C

1. Screws

4. Decorative nail

7. Door bracket

10. Top hinge (left)

1. Take out 4 screws (1) from top hinge (right) (2) and remove the top hinge(right),then put out the

door. (Fig.A)

2. Put the door safety and take out the lock hole decorative cover(3) and decorative nail (4) from top of

door frame, unscrew 2 screws (5) at bottom and remove the door axis(right) (6), then install the lock

hole decorative cover(3) and decorative nail (4) at bottom, please install the spare left door axis at top

of door frame. (Fig.B)

3. Remove the door bracket (7) from lower hinge (left)(8) and install it at lower hinge (right ) （9） . (Fig.C)

4. The door revolves 180 degrees, put door axis to aim at lower hinge (left) and install the door onto

lower hinge(left), then close the door carefully.

5. Fix spare top hinge (left) (10) onto left top of cabinet with 4 screws (1), then adjust door. (Fig.D)

Note: This is a two person operation.

2. Top hinge (right)

5. Screws

8. Lower hinge (left)

Fig.B

Fig.D

3. Lock hole decorative cover

6. Door axis(right)

9. Lower hinge (right)

Table of Contents