How To Assemble; How To Use - Hamilton Beach 67900 Owner's Manual

Hamilton beach juice extractor owner's manual
Hide thumbs Also See for 67900:
Table of Contents

Advertisement

Available languages

Available languages

840118200 Ev01 10/15/03 4:55 PM Page 4

How to Assemble

Read and follow instructions in "Before First Use."
1. Place separator on top of base as
shown on page 3.
2. Place cutter/strainer into separator
and gently push until firmly in place.
Once in place, the cutter/strainer
should spin easily.
3. Hook cover to base on one side.

How to Use

1. For more information, see "Fruit &
Vegetable Preparation."
2. Cut food into pieces to fit the food
chute.
3. Plug cord into 120 volt AC outlet.
4. Be sure juice container and pulp bin
are in place.
5. Turn switch to on. The unit will not
turn on until safety latch has been
closed.
6. Place food in food chute and press
lightly with food pusher. NEVER USE
FINGERS OR UTENSILS OTHER
THAN THE FOOD PUSHER AS A
FOOD PUSHER. Food should be
Important Information
• The juice extractor is manufactured
for NORMAL HOUSEHOLD USE. If
you have large quantities, such as
10 pounds or more, process in small
batches, allowing motor to cool
completely between uses.
• When juicing CARROTS, DO NOT
PACK food chute. Place carrots in
food chute one by one, and use
gentle pressure.
4
4. Position the top of safety latch in
5. Place pulp bin in place. Slide top in
Place cover on top
6. Place a juice cup in position,
of separator and
cutter/strainer.
NOTE: Check the pulp bin frequently.
It is important to empty the pulp bin
when full and to clean out the separator.
7. When pulp bin is full, turn unit off. It
8. When juicing is completed, or when
• DO NOT OVERLOAD THE FOOD
• If the juice extractor SEEMS TO
place, then push in at bottom to lock.
DO NOT OPERATE UNIT UNTIL
SAFETY LATCH IS LOCKED.
first, then bottom, and snap into
place.
under juice spout.
placed in food chute only when unit
is operating. Food can be continu-
ously placed in food chute without
having to turn unit off.
is very important to empty the pulp
bin when full. For best performance,
empty pulp bin and clean cutter/
strainer and separator often.
pulp bin or juice container need to
be emptied, turn unit off and unplug
from outlet. Immediately wash cut-
ter/strainer according to instructions.
CHUTE. For best results, simply drop
food pieces, one at a time, into
chute. Gently and slowly press with
food pusher. This will extract the
maximum amount of juice.
STRUGGLE or slow down, turn the
unit OFF and unplug. Thoroughly
wash the cutter/strainer and separator
according to instructions. Reassemble
and continue juicing.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents