Table of Contents
Advertisement
ACTIVATE ALARM
Navigate to the Clock Area, then press
to Daily Alarm or Pre-Alarm view. To activate or
deactivate the alarm, press
When the alarm time is reached, the backlight will be on
for 8 seconds and crescendo alarm will sound for 2
minutes. Press any key (except snooze) to silence the
alarm. It will sound at the same time the next day.
SNOOZE
Press SNOOZE/LIGHT to temporarily disable the alarm
for 8 minutes.
or
will blink while snooze is on.
BAROMETER
This product tracks fluctuations in barometric pressure
to provide the weather forecast, and the current and past
24 hours barometric pressure history measurements are
recorded by the main (indoor) unit.
VIEW BAROMETER AREA
Press MODE to navigate to the Barometer Area.
BAR826HG_UM_EN.P65
/
to switch
or
.
14
14
SELECT MEASUREMENT UNIT
Slide the mb / inHg switch (in the clock battery
compartment), to change the display unit.
VIEW BAROMETER HISTORY
Navigate to the Barometer Area. Then press MEM
repeatedly to scroll through the measurements. The
number shown in the HR box indicates how long ago
each measurement was taken (e.g. 2 hours ago, 3 hours
ago, etc.).
SET ALTITUDE
Set the altitude to match how far above or below sea
level you are living. This ensures that the barometric
pressure readings are accurate.
1. Navigate to the Barometer Area.
2. Press and hold MODE for 2 seconds.
3. Press
or
to set the altitude in 10-metre
increments (-100m to 2500m).
4. Press MODE to confirm.
2005.3.8, 11:21 AM
Hide quick links:
Advertisement
Table of Contents
