TURN ATOMIC CLOCK ON/OFF
Perform this step if you cannot receive Atomic Clock
signals. Press and hold
for 2 seconds. Then, manually
set the clock following the "Set Clock" instructions
(below).
The signal icon indicates that the Atomic Clock
feature is ON. No icon means that it is OFF
SET CLOCK
You only need to do this if you have disabled the Atomic
Clock feature (for example, if you are too far from or
cannot receive a signal).
1.
Press and hold MODE for 2 seconds. The
area
will blink.
2.
Select the time zone, hour, minute, year, month,
day, and language. Press
or
the setting. Press MODE to confirm.
NOTE
The language options are (E) English,
(F) French, (D) German, (I) Italian, and (S) Spanish.
NOTE
The time zone options are (PA) Pacific,
(CE) Central, (MO) Mountain, and (EA) Eastern.
SWITCH CLOCK DISPLAY
Press MODE to toggle between Clock with Seconds and
Clock with Weekday display.
10
BAR608HA_EN_R0C.p65
ALARMS
This product is equipped with a 2-minute crescendo
alarm.
VIEW ALARM SETTINGS
Press ((.)). The
alarm time
the
clock area.
SET ALARM
1.
Press ((.)) to switch to
2.
Press and hold ((.)) again for 2 seconds. The
alarm
settings will blink.
3.
Select the hour and minute. Press
clock
change settings. Press ((.)) to confirm.
to change
ACTIVATE ALARM
Press
to activate or deactivate the alarm.
shows in the
clock / alarm area
is activated.
SILENCE ALARM
When the
alarm
time is reached, the crescendo alarm
will sound for 2 minutes. Press SNOOZE / LIGHT to
silence it for 8 minutes. Or, press
the next day.
9
6/29/04, 4:52 PM
and ((.)) status will show in
alarm
display.
or
to
when the
alarm
to turn it off until