Cleaning Tools - Hoover PRO STAIR User Instructions

Hoover_Stabiliser_FINAL_Vs2c_01_03_06.qxp

CLEANING TOOLS*

!
IMPORTANT:When using cleaning tools, the cleaner must be kept in the
upright (parked) position, particularly when cleaning stairs.The carpet
height selector should also be set to tool mode:
The Pro Stair Brush is the ideal tool for stair
cleaning incorporating a rotating brush that
deep cleans and grooms the carpet.
DO NOT TOUCH THE ROTATING BRUSH.
The Pro Stair Brush also converts to a Crevice
tool to clean the corners between treads and
risers.
Pro Stair Telescopic Tube
Fitted on the flexible hose and with accessories
at its end, its ideal for stair cleaning.
It extends to minimise stretching and bending.
All accessories can fit on the end of the flexible
tube. Combine accessories depending on use.
Always attach the hose retainer to the hose
hook when using the cleaning tools.
Unhook after use
CLEANING THE STAIRS
It is dangerous for the cleaner to be above you at the
top of the stairs.
ALWAYS work with the cleaner below you. Ensure it is
positioned up against the bottom step.
DO NOT attach hose retainer when cleaning the stairs.
* Features vary according to model
01/03/2006 10:28 Page 5
To use your Pro Stair Brush as
a crevice tool rotate the tool to
the 'Open' position as shown.
When using the Pro
Stair Brush keep the base
of the nozzle flat to the
When cleaning treads &
risers use the crevice
tool in the 'OPEN'
PRO STAIR LOCK FEATURE*
The PRO STAIR LOCK has been designed to improve cleaner stability when you pull on
the hose while stair cleaning. It can be adjusted to suit any staircase.
carpet.
position.
-5-
Location.
The PRO STAIR LOCK, stability
device, is located at the back of the
cleaner.
Pull the bottom of the device to
release it from its storage
position.
Operation.
Lift the device upwards to the
position shown in the diagram.
Simultaneously squeeze the finger
tabs and extend the device.
Use.
Place the cleaner against the stairs
and the PRO STAIR LOCK in the
position shown. Use the stair
cleaning hose and accessories as
usual.
To return the cleaner to carpet
mode, repeat the above process in
reverse.