Hoover Vortex Pro 5231 Manual
  1. Manuals
  2. Brands
  3. Hoover Manuals
  4. Vacuum Cleaner
  5. Vortex Pro 5231
  6. Manual

Hoover Vortex Pro 5231 Manual

Digital brushless motor air velocity cordless
Hide thumbs

Advertisement

Table of Contents

Digital Brushless Motor
Air Velocity Technology
Cordless Freedom

Advertisement

Table of Contents
loading

Related Manuals for Hoover Vortex Pro 5231

Summary of Contents for Hoover Vortex Pro 5231

  • Page 1 Digital Brushless Motor Air Velocity Technology Cordless Freedom...

  • Page 3: Specifications

    5231 Vortex Pro Congratulations on the purchase of your new HOOVER vacuum cleaner. There are many useful features built into your cleaner and we recommend that you carefully read this instruction manual to take the best advantage of these features.

  • Page 4: Before You Begin

    Before You Begin This cleaner must be operated in accordance with these instructions and used only for domestic household cleaning to remove DRY dirt and dust from household carpets, flooring, walls and fabrics. This cleaner is not fit to be used as an industrial cleaner hence will void the manufacturer’s warranty if used inappropriately.

  • Page 5: Safety Precautions And Warnings

    Safety Precautions & Warnings IMPORTANT! Always switch off the appliance before cleaning, when not in use or attempting any maintenance task. The charger must only be connected to an AC power supply at the voltage shown on the rating label. This cleaner should only be used for its intended purpose as described in this instruction manual.
  • Page 6 Battery use and care 16. Before vacuuming, remove any large or sharp objects from the floor or cleaning surface in order The appliance is only to be used with the to prevent damage to the filter. charging base uniquely provided with the 17.

  • Page 7: Installing And Removing The Battery

    Assembly WARNING! Ensure that the charging base is disconnected from the Mains power before assembly. WARNING! Always switch off the cleaner before fitting or removing accessories. Place the powerhead onto a flat floor, and insert the Extension Tube as shown, ensuring it clicks into place. Place the handvac into the main body and push until it clicks into place.
  • Page 8 Accessories Powerhead Ideal for cleaning carpets and hard floors. WARNING! SEEK ADVICE FROM CARPET MANUFACTURERS BEFORE USING THE MOTORISED POWERHEAD ON WOOLLEN OR DELICATE CARPETS. NOTE: The powerhead may be difficult to manoeuvre on certain carpet types, adjust the suction by pressing the Power Control Button to reduce the suction.

  • Page 9: Dusting Brush

    2-in-1 Brush & Upholstery Tool Can be used as a soft dusting brush for cleaning different surfaces or as an upholstery tool for cleaning furniture. Dusting Brush For multi-surface cleaning. Long Crevice Tool Perfect for cleaning in between hard to reach places. Large Upholstery Tool Ideal for cleaning furniture &...
  • Page 10 Instructions for Use (continued) Charging Ensure that the power plug is plugged into the mains power supply. Place the cleaner onto the charger. When the power indicator light turns green, the vacuum cleaner battery is fully charged. IMPORTANT! Please ensure that the charging base is placed on a flat level surface.

  • Page 11: Using The Handvac

    On/Off & Power Control Buttons Press the On/Off Button to turn on the cleaner. The cleaner will begin in High Power. To select Low Power press the Power Control Button. To turn off the cleaner press the On/Off Button. Using the Handvac Remove the handvac from the body by pressing the Handvac Release Button.
  • Page 12 Instructions for Use (continued) Using the Handstick Remove the Extension Tube by pressing the Rod Release Button. Push the Handvac Extension Button as shown to release the Handvac Connector. Insert the Handvac Connector into the handvac. The accessories can now be attached to the Extension Tube.

  • Page 13: Maintenance

    Maintenance WARNING! Always switch off the cleaner before performing any maintenance. It is recommended to clean the dust bin after each use or when dust reaches the “Max” fill line. Emptying the Handvac Dust Canister Press the Handvac Release Button to remove the handvac from the cleaner.
  • Page 14 Maintenance (continued) Cleaning & Replacing the Dust Canister Filter Press the Handvac Release Button to remove the handvac from the main body. Press the Dust Canister Release Button to remove the dust canister from the handvac assembly. To remove the Dust Canister Filter pull the filter strap, as shown. The filter can now be cleaned or replaced.

  • Page 15: Replacing The Exhaust Filter

    The cyclone filter can be removed by gently pulling the filter handle to separate the cyclone filter from the dust canister. To clean the dust canister mesh filter, rotate and remove the base of the cyclone filter, as shown. Hair and debris can now be cleaned from the mesh filter.

  • Page 16: Cleaning The Roller Brush

    Maintenance (continued) Reinstalling the Canister to the Handvac Align the two pins to the socket and fully click the canister into the handvac assembly. NOTE: Failure to do so may cause damage to the cleaner. WARNING! Always switch off the cleaner before performing any maintenance on the powerhead.

  • Page 17: Cleaning The Powerhead

    Cleaning the Powerhead To remove the trap door, use a screwdriver to unlock the two screws, as shown. The hose can now be pulled out for easy cleaning. To clean, simply use the handvac to vacuum dirt or debris located inside the hose. After cleaning, replace the trap door and ensure that the two screws are turned to the ‘Locked Position’.

  • Page 18: Spare Parts

    Spare Parts Please contact Hoover Customer Care: 1300 360 845, NZ: 0800 387 442 to find your local spare parts provider. Part Part Number 33201621 Battery Filter Set 32201630 Roller Brush 33788104 Diverter dust bin 33155917 Handvac dust bin 33155918...

  • Page 19: Troubleshooting

    Troubleshooting Problems and solutions If you come across a problem, please use the checklist of troubleshooting tips before contacting Hoover Customer Care. Fault Cause Solution Cleaner will not switch on / Power Flat battery. Charger the cleaner. indicator is flashing.
  • Page 20 Conditions of warranty Your Hoover cleaner, in the case of domestic use, has a two year* Electrical Home-Aids Pty Ltd is unable to accept responsibility under parts and labour warranty against product defects and failures when this warranty for any repair work not carried out by an authorised the product is used in accordance with the terms and conditions of Hoover Service Agent or from the use of non-genuine parts.

Table of Contents