Automatic Features - Hoover Performa Plus Instruction Book

Temperature Selector
The washing machine is equipped with a Temperature Selector
knob to set the temperature you require. Greater energy
savings can be achieved by using the lower temperature
settings around the dial between and 40°C. By selecting
the position, the wash temperature is equivalent to the
water inlet temperature, thus reducing energy consumption
further. We recommend that the temperature shown on wash
care garments should never be exceeded.
In the case where the temperature has been accidentally set
higher than that of the chosen programme, (see Programme
Guide table), the machine will lower the temperature
automatically to protect the fabrics.

Automatic Features

Automatic Variable Capacity (Half Load)
The washing machine is fitted with a self adjusting water level
system. This system enables the machine to use the optimum
amount of water needed to wash and rinse the laundry in
relation to the particular load. This results in a reduction of the
water and electricity used without in any way compromising
the washing and rinsing performance. The amount of water
and electricity used will always be appropriate for the clothes
load.
The washing machine automatically ensures excellent washing
results at minimum cost whilst respecting the environment.
Out of Balance protection
This model is fitted with an electronic sensor device that
checks if the load is balanced correctly. If the load is slightly
unbalanced the machine will re-balance it automatically to
then carry out the normal spin.
If, after several attempts, balance is not restored a reduced
spin speed will be used.
If loads are seriously unbalanced the spin stage will be
cancelled. This helps limit vibration, reduce noise and improve
the washing machine's reliability and life.
19