IMPORTANT: Observe all governing codes and ordinances.
Failure to meet codes and ordinances could lead to fire or
electrical shock.
Proper installation is your responsibility.
•
Contact a qualified installer to ensure that the dishwasher is
installed to meet all electrical and plumbing national and local
codes and ordinances.
•
Install the dishwasher as specified in these instructions.
•
Have everything you need to properly install dishwasher.
•
Avoid damage from freezing to dishwasher and water lines
leading to dishwasher. Damage from freezing is not covered
by the warranty.
•
This dishwasher is manufactured for indoor use only.
•
Install and level dishwasher on a floor that will hold the weight,
and in an area suitable for its size and use.
Product
Dimensions
24,,
.... 23 ,,
(61 cm)
333/4"
(85.7 cm)
48.9 cm)
11/2"
(3.75 cm)
Installation Clearances
Cutout Dimensions
+
............................................................
...............................................
/
(61 cm)
/
Preferred Utility Area
(1 3 crn)
A. Left-hand or right-hand
water connection
route
B. Left-hand or right-hand
electric connection
and drain route
NOTE: All holes should be drilled at 1V2" (3.8 cm) diameter.
•
A hot water line with 20 to 120 psi (138 to 862 kPa) water
pressure.
•
120°F (49°C) water temperature at dishwasher.
•
Flexible stainless steel braided fill line (1/2"minimum plastic
tubing is not recommended).