Install Trim Pieces And Level Dishwasher - KitchenAid KUDD03DTPA3 Installation Instructions Manual

Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector in
terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
3. Connect wires as follows using twist-on connectors sized to
connect direct wire to 16-gauge dishwasher wire.
Power supply wire: Terminal box wire:
white white
black black
ground wire _ _ ground connector
4. Attach ground wire to the green ground screw.
\
\
\
B
A. Attach ground wire to green screw.
B. Attach white and black wires.
5=
Reinstall electric box cover with all wires contained inside the
terminal box.
NOTE: Do not plug into outlet until instructed to do so.
1. Open bottom drawer.
2. Push in clips and slide rails back 5" (12.7 cm).
3. Lift drawer off slide rails. Place drawer off to the left on
covering. Slide rails into dishwasher.
13