Location Requirements; Product Dimensions; Water Supply Requirements - KitchenAid KUDD03DT Series Technical Education

LOCATION REQUIREMENTS

IMPORTANT: Observe all governing codes and
ordinances. Failure to meet codes and ordi-
nances could lead to fire or electrical shock.
Proper installation is your responsibility.
• Contact a qualified installer to ensure that the
dishwasher is installed to meet all electrical
and plumbing national and local codes and
ordinances.
• Install the dishwasher as specified in these
instructions.
• Have everything you need to properly install
dishwasher.
• Protect dishwasher and water lines leading to
dishwasher against freezing. Damage from
freezing is not covered by the warranty.
• This dishwasher is manufactured for indoor
use only.
• Install and level dishwasher on a floor that
will hold the weight, and in an area suitable

PRODUCT DIMENSIONS

24"
(61 cm)
�⁄�
33 "
85.8 cm)
�⁄�
19 "
(48.9 cm)
INSTALLATION CLEARANCES
Cutout dimensions
Preferred utililty area
�⁄�
23 "
(59.5 cm)
34"
(86.4 cm)
A. Choose left-hand or right-hand drain and water connection route.
B. Choose left-hand or right-hand electric connection route.
NOTE: All holes should be drilled at 1/2"
(3.8 cm) diameter.

WATER SUPPLY REQUIREMENTS

•
�⁄�
1 "
(3.75 cm)
•
•
2-3
23�⁄� "
(59.7 cm)
A
1/2"
(1.3 cm)
25"
(63.5 cm)
B
A hot water line with 20-120 psi (138-862
kPa) water pressure.
120°F (49°C) water temperature at dish-
washer.
Flexible stainless steel braided fill line (½" min-
imum plastic tubing is not recommended).
24"
33�⁄�"
(61 cm)
(85.7 cm)
8"
(20.3 cm)