Install Trim Pieces And Level Dishwasher - KitchenAid KUDD03STBL0 Installation Instructions Manual

Drawer dishwasher
Hide thumbs Also See for KUDD03STBL0:
Table of Contents

Advertisement

Available languages

Available languages

5,
Reinstall electric box cover with all wires contained inside the
terminal box.
5. Check left to right level by placing the level on the top of the
drawer. Check front to back level by placing level on the slide
rails.
6,
T_
-....
Adjust legs with a 3/le" socket wrench to level the dishwasher.
1. Open bottom drawer.
2. Push in clips and slide rails back 5" (12.7 cm).
\\
\\
3. Lift drawer off slide rails. Place drawer off to the left on
covering. Slide rails into dishwasher.
%
7,
4. Slide the dishwasher into position in the cabinet opening.
Check to ensure that the drain hose and electrical wiring are
not kinked.
A. Adjust legs.
Rest trim strip on floor and mark trim at the top of the frame
flange height. Pick the closest groove to the mark. If the mark
is between two grooves, choose the groove that makes the
trim strip the shortest. On a covered surface, cut the trim strip
at the selected groove. Pull dishwasher
back out of cabinet
opening about 6" (15.24 cm).
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents