Install Trim Pieces And Level Dishwasher - KitchenAid KUDD03DTPA - 24" Double Drawer Dishwasher Installation Instructions Manual

Drawer dishwasher
Hide thumbs Also See for KUDD03DTPA - 24" Double Drawer Dishwasher:
Table of Contents

Advertisement

Available languages

Available languages

WARNING
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector in
terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
3. Connect wires as follows using twist-on connectors sized to
connect direct wire to 16 gauge dishwasher wire.
Power supply wire:
white
black
ground wire
4. Attach ground wire to the green ground screw.
A
A. Attach ground wire to green screw.
B. Attach white and black wires.
5. Reinstall electric box cover with all wires contained inside the
Terminal box wire:
NOTE: Do not plug cord into outlet until instructed to do so.
white
black
1. Open bottom drawer.
ground connector
2. Push in clips and slide rails back 5" (12.7 cm).
3. Lift drawer off slide rails. Place drawer off to the left on
B
4. Slide the dishwasher into position in the cabinet opening.
terminal box.

Install Trim Pieces and Level Dishwasher

covering. Slide rails into dishwasher.
Check to ensure that the drain hose and electrical wiring are
not kinked.
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kudd03dtssKudh03dtss - 24 in. dishwasher

Table of Contents