KitchenAid KUDD03STPA10 Installation Instructions Manual page 8

3. Adjust leveling l egs based o nthecabinet opening
measurement and thechart b elow.
H :X
17"(43.2cm) :0"
171_" (43,5cm) :_" (0,3 cm)
17¼" (43.8 cm) Y4" (0,6 cm)
17_" (44,1 cm) :_" (1 cm)
17½" (44.5 cm) :_/2" (t.3 cm)
17_" (44.6 cm) :_" (1.6 cm)
173_'' (45,1 cm) :_" (1.9 cm)
H :X
17_" (45.4 cm) : _" (2.2 cm)
18" (45.7 cm) :I" (2.5 cm)
18_"(46cm) :1_"(2.9cm)
18¼" (46.4 cm) :I ¼" (3.2 cm)
187_" (46,7 cm) :17_" (3.5 cm)
18½"(47cm) :1½"(3.8cm)
4. Place dishwasher in upright position.
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
Follow all national and local codes and ordinances for completing
electrical supply to cabinet.
Option 1: Right-hand side utility route
Route wire through I _/2"(3.81 cm) hole located 8" (20.32 cm)
above the floo_
After routing the electrical wire through the right-hand hole,
attach the wire to back left-hand side of cabinet wall 8"
(20.32 cm) above the cabinet floor. Then continue routing the wire
along the left-hand side of cabinet opening to the front of the
opening.
Option 2: Left-hand side utility route
Route wire through 1_/_"(3.81 cm) hole located 8" (20.32 cm)
above the floo_
After routing the electrical wire through the left-hand hole,
continue routing the wire along the left-hand side of cabinet floor
to the front of the opening.
8