KitchenAid KUDD03STPA10 Installation Instructions Manual page 10

1.
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
Remove screw securing the electrical box cover. Remove
cover
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector in
terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
3. Connect wires as follows using twist-on connectors sized to
connect direct wire to 16 gauge dishwasher wire.
Power supply wire: Terminal box wire:
white white
black black
ground wire : : ground connector
4. Attach ground wire to the green ground screw.
2.
Route electrical wires through strain relief and secure to
electrical plate.
A. Attach ground wire to green screw.
B. Attach white and black wires.
10