KitchenAid KUDD03STPA10 Installation Instructions Manual page 16

1,
Remove the two panel fasteners from the face of the inner
door.
2. To secure the overlay panel onto the drawer, push the overlay
panel down until the top of the overlay panel is flush with the
top of the control panel.
3. Using the screws provided, secure the overlay panel to the
inner door by screwing through the inner door and into the W'
(3.175mm) pilot holes.
Q
2. Screw the two panel fasteners into the panel fastener pilot
holes of the overlay panel.
1. Mount the overlay panel to the drawer by aligning the panel
fasteners to the two keyhole slots and insert the panel.
16