Advertisement
i
C
imensions
Countertop
opening and cJearance
dimensions
that are shown must be
use& Given dimensions provide required
clearances.
Mobile home installation:
The
installation of this cooktop must conform
to the Manufactured Home Construction
and Safety Standards, Title 24 CFR, Part
3280 (formerly the Federal Standard for
Mobile Home Construction and Safety;
Title 24 HUD part 280)i or when such
standard is not applicable, the Standard
for Manufactured Home installations
(Manufactured Home Sites, Communities
and Setups), ANSI A225.1 --latest
edition*, or with local codes.
E
CORNERNOTCH
RETAIL
In Canada, the installation of this cooktop
must conform with the current standards
CAN/CSA-Z240 -- latest edition**, or with
local codes.
The cooktop is designed to hang from the
countertop by its side and rear flanges.
The gas and electric supply should be
located as shown in "Gas and Electric
Dimensions," Page 5, so that they are
accessible without requiring removal of
the cooktoF
Provide cutout in left rear corner of cutout
enclosure
as shown to provide clearance
for gas inlet, power supply cord, and to
allow the rating label to be visible=
Copies of the standards listed may be
obtained from:
* Nationa_ Fire Protection
Association
One Batterymarch
Park
Quincy, Massachusetts
02269
** CSA Internationa_
8501 East Pleasant Valley Rd.
Cleveland,
Ohio 44131o6876
12=5/16" (31.3 cm)
mie. deara0ce to
side wall =
beth sides
rain.
_8" (121.9 cm)
model
KGCP452K
KGCP453K
KGOP467J
KGCP482K
KGCP483K
KGCP484K
KGCP487J
island trim
(12,7 cm)
6 uu
(15,2 cm)
5"
(12,7 cm)
6" (152 cm)
5""
(12,7 cm}
hackguard
1-3/4"
(4.4 cm)
1=3/4"
(4_4 cm)
5"
(12.7 cm)
Rim n_)
island trim
hackguard
48" (121 _9cm)
49" (124,5 cm}
48"
49"
(121 _9cm)
(124_5 cm)
48"
(121.9 cm)
48" (121,9 cm)
C
hackguard
opening
36"
(91.4 cm)
£
cabinetand
coontertop
35=1/4"
(80,5 cm)
coontertop only
36" (91.4 cm) or
35=7/8" (91.1 cm)
fur zero clearance fit
48" (121 _9cm) or
47o7/8" (121.6 cm)
fur zero clearance fit
Note: #imension "B" can he reduced by 6" (15.2 cm) when bottom of wood or metal cabinet is protected by not less than 0.25" (&4 ram) flame retardant
miHhoard covered with not less than No_ 28 [¢tSGsheet steel, &815" (8.4 mm) stainless steel, 8.824" (0.6 ram) aluminum or 8.820" (8.5 mm) copper.
Advertisement
