Table of Contents
Advertisement
5.
Select DDNS Type. Three different DDNS types are selectable: IpServer, PeanutHull and DynDNS.
• IpServer: Enter Server Address for IpServer. Refer to Figure6.
• PeanutHull: Enter User Name and Password obtained from the PeanutHull website (Figure 7).
• DynDNS: Enter Server Address for DynDNS (i.e. members.dyndns.org). Under DVR Domain
Name, enter the domain obtained from the DynDNS web site. Finally, enter the User Name and
Password registered in the DynDNS network.
Figure 7. DynDNS Settings
NTP Server Settings
A Network Time Protocol (NTP) Server may also be set up on your DVR to maintain accurate current date and time.
To set up an NTP server:
1.
Click Menu > Settings > Network to enter the Network Settings menu.
2.
Select the Advanced tab.
3.
Click the Set button next to NTP to enter the NTP Settings menu, as shown in Figure 8.
Figure 8. NTP Settings Menu
4.
Check the NTP checkbox to enable this feature.
5.
Configure NTP settings:
• Synchronize Interval: Time in minutes to synchronize with NTP server.
61
Advertisement
Table of Contents
