Table of Contents
Advertisement
Touch
X
and enter the length of the original
3
from the 10-Key Pad. Then, touch
enter the width of the original.
(To correct a value entered, press the Clear
Key.)
Touch
and enter the frame erase
Width
4
width from the 10-Key Pad.
Touch
OK
.
5
Useful Tips
• Touch
(cancel) to cancel the settings made
C
for, and exit from, Frame Erase.
• This copier has been designed to have a lost
image of a width of 8 mm on the leading edge,
4 mm on the trailing edge, and 3 mm each on
the front and rear edges in the full size mode.
Set a frame erase "Width" wider than each of
these values to have a frame erase effect at all.
• A shadow can at times be produced along the
edges when you make an A3 Wide copy from an
A3 original. We recommend that Frame Erase
be used in such cases.
1. Using the Applied Input
<When the original is standard size>
Y
and
Touch
1
Select the applicable "Original Size."
2
Touch the exact size key or
1154P177DA
Enter the frame erase "Width" from the 10-
3
key Pad.
1154P178DA
Touch
4
Useful Tips
• Touch
for, and exit from, Frame Erase.
• This copier has been designed to have a lost
image of a width of 8 mm on the leading edge,
4 mm on the trailing edge, and 3 mm each on
the front and rear edges in the full size mode.
Set a frame erase "Width" wider than each of
these values to have a frame erase effect at all.
• A shadow can at times be produced along the
edges when you make an A3 Wide copy from an
A3 original. We recommend that Frame Erase
be used in such cases.
Output Functions
Frame Erase
.
Auto Detect
.
OK
(cancel) to cancel the settings made
C
4-3
1154P140CA
.
1154P175DA
1154P176DA
Advertisement
Table of Contents
