Table of Contents
Advertisement
4. Input
Output Mode
Auto Dual Function in the Sort Mode
Each of the Sort Bins holds up to 25 sheets of
paper. The Auto Dual Function, however, allows
sorting of copies of up to 50 originals under
certain conditions.
Copies
1st to 25th sorted copies
26st to 50th sorted copies
* If the number of copies selected exceeds 5, the
copy cycle stops at the 25th original.
* To have a complete set of originals, place the
copies from the 6th Bin on top of those from
When the Number of Copies Selected Exceeds 25 in the Group Mode
When more than 25 copies are to be grouped
together into one group, the Staple Sorter uses the
Original
1st to 25th copies
1st
26st and subsequent copies
2nd to Nth: Same way up to 10th
If the Number of Copies Selected Exceeds 50 in the Non-Sort Mode
The capacity of the 1st Bin is 50. If more than 50
copies are made in the Non-Sort mode, the Sorter
uses the 1st, 2nd, and subsequent Bins to hold
Auto Dual Function in Sort-and-Staple Mode
When 5 or less copies are made from an original
set consisting of more than 26 originals in the
Sort-and-Staple Mode and the Auto Dual function
is activated, the Sort-and-Staple Mode is
automatically switched to the Sort Mode (no
stapling takes place.)
When less than 5 copies are made from an original
set consisting of more than 25 originals, in the
Sort Mode the Sorter or the Staple Sorter is
automatically switched into the Auto Dual
Function Mode using the 6th to 10th Bins.
1st to 5th Bins
6th to 10th Bins
the 1st Bin. In the same way, place the copies
from the 7th Bin on top of those from the 2nd
Bin, and so on.
next Bin to continue grouping the copies.
Copies
those excess copies.
4. Input Output Mode
Bins Used
Bins Used
1st Bin
2nd Bin
3-33
Advertisement
Table of Contents
