Lincoln 2006 LS Owner's Manual page 223

Driving
ABS warning lamp
The ABS lamp in the instrument
cluster momentarily illuminates
ABS
when the ignition is turned on. If
the light does not illuminate during
start up, remains on or flashes, the
ABS may be disabled and may need to be serviced.
Even when the ABS is disabled,
BRAKE
normal braking is still effective. (If
your BRAKE warning lamp
! P
illuminates with the parking brake
released, have your brake system
serviced immediately by an authorized dealer.)
Using ABS
When hard braking is required, apply continuous force on the brake
pedal; do not pump the brake pedal since this will reduce the
effectiveness of the ABS and will increase your vehicle's stopping
distance. The ABS will be activated immediately, allowing you to retain
full steering control during hard braking and on slippery surfaces.
However, the ABS does not decrease stopping distance.
Parking brake
To set the parking brake, pull the lever up. To release the parking brake,
make sure the ignition is turned to ON, depress the brake pedal, then
gently push the parking brake lever down.
223
2006 Lincoln LS (dew)
Owners Guide (post-2002-fmt)
USA (fus)