Lincoln 2006 LS Owner's Manual page 305

Fluid Ford Part
Name
Transmission Motorcraft
4
fluid MERCON V
ATF
Windshield Motorcraft
washer fluid Premium
Windshield
Washer
Concentrate
1
Use only brake fluids certified to meet Ford specifications. Refer to
Lubricant Specifications in this chapter. DOT 3 fluid is recommended.
However, if DOT 3 is not available, DOT 4 fluid can be used.
2
Add the coolant type originally equipped in your vehicle.
3
Your vehicle's rear axle is filled with a synthetic rear axle lubricant and
is considered lubricated for life. These lubricants do not need to be
checked or changed unless a leak is suspected, service is required or the
axle assembly has been submerged in water. The axle lubricant should
be changed any time the rear axle has been submerged in water. Fill 1/4
inch to 9/16 inch (6 mm to 14 mm) below bottom of fill hole.
4
Ensure the correct automatic transmission fluid is used. MERCON and
MERCON V are not interchangeable. DO NOT MIX MERCON and
MERCON V. Refer to the scheduled maintenance information to
determine the correct service interval.
5
Approximate dry capacity, includes cooler and tubes. Fluid level should
be checked by an authorized dealer.
6
Use of synthetic or synthetic blend motor oil is not mandatory. Engine
oil need only meet the requirements of Ford specification
WSS-M2C930-A and the API Certification mark.
2006 Lincoln LS (dew)
Owners Guide (post-2002-fmt)
USA (fus)
Maintenance and Specifications
Application
Automatic
(5R55S)
All
Capacity
11.9 quarts
5
(11.2L)
Fill to line on
reservoir
305