Chapter 3: Getting Started; Unpacking The Clean Bench; Installing Vertical Clean Bench On A Supporting Structure And Work Surface - Labconco Purifier 3970200 User Manual

Vertical clean benches

Hide thumbs

Table Of Contents

Unpacking the Clean Bench

Carefully remove the shrink-wrap or carton on the Clean Bench

and inspect it for damage that may have occurred in transit. If

damaged, notify the delivery carrier immediately and retain the

entire shipment intact for inspection by the carrier.

Do not discard the packing material until you have checked all of

the components and tested the Clean Bench.

We recommend that you do not remove the Clean Bench from its

shipping container until it is ready to be placed into its final

location. Move the Clean Bench by placing a flat, low dolly under

the shipping skid, or by using a floor jack.

Installing the Vertical Clean

Bench on a Supporting Structure

and Work Surface

Use caution when lifting or moving the Clean Bench.

When installing the Clean Bench onto a chemical-resistant work

surface or benchtop, ensure that the structure can safely support the

combined weight of the Clean Bench and any related equipment.

Product Service 1-800-522-7658

DO NOT RETURN GOODS WITHOUT THE

PRIOR AUTHORIZATION OF LABCONCO.

UNAUTHORIZED RETURNS WILL NOT BE

ACCEPTED.

IF CLEAN BENCH WAS DAMAGED IN

TRANSIT, YOU MUST FILE A CLAIM

DIRECTLY WITH THE FREIGHT CARRIER.

LABCONCO CORPORATION AND ITS

DEALERS ARE NOT RESPONSIBLE FOR

SHIPPING DAMAGES.

Do not move the Clean Bench by tilting it onto a

hand truck.