Shelf Supports; Removing The Shelf Supports; Installing The Shelf Supports; Oven Ceiling - AEG DE4003000 User Manual

• Clean stubborn dirt with a special
oven cleaner.
• Clean all oven accessories (with a soft
cloth with warm water and cleaning
agent) after each use and let them dry.
• If you have nonstick accessories, do
not clean them using an aggressive
agents, sharp edged objects or dish-
washer. It can destroy nonstick coat-
ing!

9.1 Shelf supports

Removing the shelf supports

1

Installing the shelf supports

Install the shelf supports in the opposite
sequence.
Valid for telescopic runners:
The retaining pins on the tele-
scopic runners must point to the
front.

9.2 Oven Ceiling

You can fold down the heating element
on the oven ceiling to clean the oven
ceiling easily.
Folding down the heating element
1. Remove the shelf support rails.
2
Stainless steel or aluminium ap-
pliances:
Clean the oven door with a wet
sponge only. Dry it with a soft
cloth.
Do not use steel wool, acids or
abrasive materials as they can
damage the oven surface. Clean
the oven control panel with the
same precautions
You can remove the shelf supports to
clean the side walls.
1. Pull the front of the shelf support
away from the side wall.
2. Pull the rear end of the shelf sup-
port away from the side wall and re-
move it.
2. Hold the heating element with the
two hands at the front
ENGLISH
17