ZyXEL Communications VOP1372G-61 User Manual page 29

This is an example Xmodem configuration upload using HyperTerminal. Click Transfer, then Send
9
File to display the following screen.
Figure 14 Example Xmodem Upload
10 After a successful firmware upload, the line card restarts. The console port speed automatically
changes back to 9600 bps when the line card restarts.
Bootbase Version: V1.00 | 03/23/2007 16:10:06
FLASH: AMD 32M
Hardware Version:
Serial Number:
RAM: Size = 133120 Kbytes
ZyNOS Version: V3.97(UHE.0) | 05/19/2011 11:56:26
Press any key to enter debug mode within 3 seconds.
...........
Enter Debug Mode
atba5
Now, console speed will be changed to 115200 bps
OK
atur
Starting XMODEM upload (CRC mode)....
CCCCCCCC
Total 2003968 bytes received.
Erasing...............................
...........................................................................
...........................................................................
...........................................................................
...........................................................................
...........................................................................
...........................................................................
.........
OK
System Reboot...
Console speed will be changed to 9600 bps
VOP1372G-61 User's Guide
Chapter 3 Troubleshooting
Type the firmware file's
location, or click Browse to
search for it.
Choose the 1K Xmodem
protocol.
Then click Send.
29