Default Settings - ZyXEL Communications VOP1372G-61 User Manual

Chapter 1 Introducing the VOP1372G
The following table describes the port labels on the front panel.
Table 3 Front Panel Ports
LABEL
CONSOLE
1-24, 25-48, 49-72
The following table describes the LED indicators on the front panel of the VOP.
Table 4 LED Descriptions
LED COLOR STATUS DESCRIPTION
PWR Green
SYS Green
ALM Red

1.4 Default Settings

Refer to your MSC's User's Guide for information on default settings.
16
DESCRIPTION
For troubleshooting purposes, this mini RJ-11port connects to a computer when the
line card is not manageable from the MSC.
These Telco-50 connectors are for connecting the VOP to the splitter cards.
On The line card is turned on.
Off The line card is off.
Blinking The line card is rebooting and performing self-diagnostic tests.
On The line card is on and functioning properly.
Off The power is off, or the line card is malfunctioning.
On The temperature or voltage is outside the safe range, or there is a hardware
failure.
Off The temperature or voltage is inside the safe range and the VOP is functioning
normally.
VOP1372G-61 User's Guide