Epson PowerLite Home Cinema5030UB User Manual page 88

Note: The lamp usage timer does not register any hours until you have used the lamp for at least 10
hours. Available settings depend on the current input source.
Information item
Lamp Hours
Source
Input Signal
Resolution
Scan Mode
Refresh Rate
3D Format
Sync Info
Deep Color
Status
Serial Number
Description
Displays the number of hours (H) the lamp has been used in each
Power Consumption mode; if the information is displayed in yellow,
obtain a genuine Epson replacement lamp soon
Displays the name of the port to which the current input source is
connected
Displays the input signal type setting of the current input source
Displays the resolution of the current input source
Displays the scan mode (progressive or interlaced)
Displays the refresh rate of the current input source
Displays the 3D format of the current input source
Displays information that may be needed by a service technician
Displays Deep Color information
Displays information about projector problems that may be needed
by a service technician
Displays the projector's serial number
88