Xerox Phaser 6200 Setup Manual page 14

Color laser printer

Hide thumbs Also See for Phaser 6200:

Table of Contents

Pull the four ribbons completely out of the imaging unit. There is a circle printed on the end of

each ribbon.

Remove the shipping block from the imaging unit. Discard the shipping block.

Use one hand to hold the imaging unit by the handle. Use your other hand to support and guide the

imaging unit into the printer. Make sure that the rods on both sides of the imaging unit align with

the slots indicated by the arrows on the printer.

4.5 kg

10 lbs.

Phaser® 6200 Color Laser Printer

Setting up the Printer

Table of Contents