Xerox Phaser 6200 Setup Manual page 10

3. Fan the paper to release sheets that are stuck together.
Caution
DO NOT load card stock, glossy coated paper, photo paper, envelopes, labels, business
cards, greeting cards, CD/DVD labels, and CD/DVD inserts in Trays 1-3; use the
Multi-Purpose Tray instead. Refer to the Trays and Paper Guide on the Interactive
Documentation CD-ROM for more information about using the Multi-Purpose Tray.
4. Insert the stack of paper into the tray. Place the paper under the front corner tabs and under the tabs
on the back guide.
For one-sided prints, place the side to be printed faceup with the top of the page at the front
I
of the tray.
For two-sided prints, place the side to be printed with the odd-numbered pages facedown
I
with the top of the page at the back of the tray. If using paper with pre-punched holes, place
the holes toward the right side of the tray.
Note
Observe the fill lines on the side of the tray. Do not load paper above the paper fill line (1),
because it may cause a jam. Do not load transparencies above the transparency fill line (2).
Phaser® 6200 Color Laser Printer
Setting up the Printer
MAX
1
MAX
2
7