Option Menu - Bosch UML-323-90 User Manual

Bosch High Performance HD LED Monitors
6.6

Option Menu

To access the Option menu, press the Menu button on the control panel of the monitor, then
press the UP and Down arrow buttons to select the Option icon. Press the Left arrow button
to enter the menu, and then press the Up and Down arrow buttons to select a submenu. When
finished, press the Menu button to save any changes, then press the Menu button again to exit
the OSD.
Options
Submenu
Aspect Ration
PIP
Video Source
Auto Adjustment
Clock Frequency
Phase
H Position
V Position
Ambient Light Sensor Sets the ambient light sensor. Once enabled, the monitor
Auto Detection
Bosch Security Systems, Inc.
Aspect Ratio
PIP
Video Source
Auto Adjustment
Clock Frequency
Phase
H Position
V Position
Ambient Light Sensor
Auto Detection
:Move :Enter
Definition
Selects the Aspect Ratio mode. Choices are: Full and Original.
Sets the PIP relevant settings.
– PIP Enable: activates the PIP feature.
– Main Input and Sub Input: selects the video input source for the
main picture and the sub picture. Refer to Section 6.6.1 PIP
Availability, page 31, for the availability of the input source
combinations.
– PIP Size: selects the size of the sub picture. Choices are: Large
and Small.
– PIP Position: adjusts the position of the sub picture on the main
picture. Press the arrow buttons to make adjustments.
Selects the video input source. Choices are: AV, S-Video, VGA,
YPbPr, DVI, and HDMI.
Auto synchronizes the screen to the graphics adaptor.
Adjusts the monitor's clock frequency (range 0-31).
Adjusts the monitor's phase range (range 0-31).
Adjusts the monitor's horizontal position (range 0-31).
Adjusts the monitor's vertical position (range 0-31).
automatically adjusts the image brightness as the ambient lighting
conditions change. Choices are: High, Low, and OFF.
Allows the monitor to automatically switch to and display an available
input signal.
User's Manual
Full
AV
External
:Exit
Navigating the Monitor | en
F.01U.134.499 | 2.0 | 2012.10
31