Connecting External Equipment - Toshiba DIGITAL 26DL934G Owner's Manual

Digital series

Table of Contents

Before connecting any external equipment, remove the mains plug from the wall socket.

Aerial cable:...........................................................

Connect the aerial to the ANT. socket on the rear of the TV.

SCART lead:..........................................................

If you use a decoder* or a media recorder, it is essential

that the scart cable is connected to the TV.

Before running ﬁ rst time installation, any connected devices

need to be set to standby mode.

The DIGITAL AUDIO socket enables the connection of a

suitable surround sound system.

HDMI

(High-Deﬁ nition Multimedia Interface) is for using

with a DVD decoder or other equipment with digital audio and

video output. It is designed for best performance with 1080i

and 1080p high-deﬁ nition video signals but will also accept

and display VGA, 480i, 480p, 576i, 576p and 720p signals.

PC format signals will also be displayed.

NOTE: Although this TV is able to connect to HDMI equipment,

it is possible that some equipment may not operate correctly.

01_MB62_[GB]_(01-TV)_DVB_TC_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077727_10077398.indd 9

Connecting External Equipment

English - 9 -

A wide variety of external equipment can be connected to the

TV; therefore, the relevant owner's manuals for all additional

equipment must be referred to for exact instructions.

If the TV automatically switches over to monitor external

equipment, return to normal TV by pressing the desired pro-

gramme position button. To recall external equipment, press

button repeatedly to switch between sources.

Regardless of source's property, audio output from the DIGI-

TAL AUDIO socket cannot be copied.

08.05.2012 14:55:41

Table of Contents

Table of Contents

Digital 26dl933g