Using The Tv Headphones - Brookstone iDESIGN Instruction Manual

Wireless tv headphones

Hide thumbs Also See for iDESIGN:

UsInG The Tv heaDPhones vIa Rca jacks

1 .

Plug the 3 . 5 mm AUDIO TO RCA CABLE into the RCA audio output

jacks on your TV .

2 .

Plug the 3 . 5 mm AUDIO/HEADPHONE CABLE into the audio output

jack on the 3 . 5 mm AUDIO TO RCA CABLE .

3 .

Plug the AC ADAPTER into the DC 12V PORT on the TRANSMITTER

and then into a regular 110V wall outlet .

4 .

Place the TRANSMITTER in a position that will be within the line of sight

of the headphones when you are wearing them as you watch TV .

5 .

Slide the POWER ON/OFF SWITCH on the TRANSMITTER to ON .

6 .

Turn on the TV and ensure the volume of the TV is turned all the way down .

7 .

Turn the headphone VOLUME to its lowest setting .

8 .

Turn on the headphones by sliding the POWER ON/OFF SWITCH on the

headphones to ON, and settle them comfortably on your head, adjusting

the length of the HEAD BAND accordingly .

9 .

Adjust the VOLUME on the headphones to enjoy the audio at any volume

level privately, without disturbing others—even if you're in the same room!

Table of Contents