Brookstone iDESIGN Instruction Manual page 11

Wireless tv headphones

Hide thumbs Also See for iDESIGN:

UsInG The Tv heaDPhones vIa heaDPhone jack

1 .

Plug the 3 . 5 mm AUDIO/HEADPHONE CABLE into the audio output

jack on your TV .

2 .

Plug the AC ADAPTER into the DC 12V PORT on the TRANSMITTER

and then into a regular 110V wall outlet .

3 .

Place the TRANSMITTER in a position that will be within the line of sight

of the headphones when you are wearing them as you watch TV .

4 .

Slide the POWER ON/OFF SWITCH on the TRANSMITTER to ON .

5 .

Turn on the TV .

6 .

Turn the headphone VOLUME to its lowest setting .

7 .

Turn on the headphones by sliding the POWER ON/OFF SWITCH on the

headphones to ON, and settle them comfortably on your head, adjusting

the length of the HEAD BAND accordingly .

8 .

Adjust the VOLUME on the headphones and your TV to enjoy the audio

at any volume level privately, without disturbing others—even if you're in

the same room!

Note: The TV volume must be on at an audible level in order to hear sound

through the headphones.

Table of Contents