Advertisement
Available languages
Available languages
Installation
instructions
- Performing
installation
Cycle
Before
operating
the dryer,
make
sure the dryer
area
is
clear
and
free
of combustible
materials,
gasoline,
and
other
flammable
vapors.
Also
see that
nothing
(such
as
] boxes,
clothing,
etc.)
obstructs
the flow
of combustion
and
ventilation
air.
,MPo
..........................
......................
.................
.........
On gas dryers, before the burner wiii light, it is necessary
for the gas line to be bled of air. If the burner does
not light within
45 seconds the first time the dryer is
turned on, the safety
switch wiii shut the burner off:. If
this happens, press POWER and wait 5 minutes before
making
another
attempt
to light.
With your dryer in final location,
perform
an lnstallatlon
Cycle to assist in proper installation.
If your dryer has this console:
J
1. Empty dryer's drum and close door.
|
2b
3
4
2.After
you plug in the dryer the first time: wake up the dryer by pressing the POWER button (3), rotate cycle knob to cycle
one up from lower right position
(1), and within
10 seconds, immediately
and simultaneously
press and hold both the far
right options button above the LED (2a) and the far right settings button under the LED (2b) for 5 seconds, or until the LED
display
changes.
3. The LED window will display |
(Install) and show estimated time of cycle completion.
Press the START button (4). The
Insfallatlon
Cycle will automatically
perform
various diagnostic
routines. At cycle completion,
the LCD window may display
_-_
(Install Pass), meaning your new dryer is properly installed and ready for use. If it prompts an action such as
__lml_J
(Service Cord), |_l_J_J
(No Gas), or __JD!
(Call Service-
1-800-4-MY-HOME),
review the
installation
steps and make the necessary corrections
before you attempt
to use the dryer.
4.Your dryer will exit the Instaffatlon
Cycle and return to normal
operation
the next time you wake it up.
Dryer will stay awake for 3 minutes after the Insfaffafion
Cycle. If you wish to immediately
run the
dryer through
a drying
cycle, press the POWER button to put the unit to sleep and then rewake it
immediately
with the POWER button to continue
the normal
...........................................................................
5. Please read the Use & Care Guide and enjoy your new premium
dryer!
If your dryer has this console:
J
"_
1. After you plug in the dryer the first time, the dryer will power up on its own. Then follow
the prompts
on the touch screen
LCD, including language
selection.
2.The Installation
Cycle wiii automatically
perform
various diagnostic
routines. At cycle completion,
the LCD window
may
display
INSTALL PASS!, meaning
your new dryer is properly
installed
and ready for use. If it prompts an action
such as
SERVICE CORD, NO GAS, or CALL SERVICE - |-800-4-MY_HOME,
review the installation
steps and make the necessary
corrections
before you attempt
to use the dryer.
3.Your dryer will exit the Instailatlon
Cycle and return to normal
operation
the next time you wake it up.
NOTE .............................
Dryer will stay awake for 3 minutes after the Installa|ion
Cycle.
If you wish to immediately
run the
dryer through
a drying
cycle, press the POWER button to put the unit to sleep and then rewake it
immediately
with the POWER button to continue
the normal
operating
mode.
4.Please
read the Use & Care Guide and enjoy your new premium
dryer!
20
Advertisement
